3 Must-have Safety Tools for Oil, Gas, & Water Treatment Industries

 

Tools are very important in oil and gas industries because they are used in various operations for drilling, refining, and production. Without the proper tools, these operations would be significantly more difficult, if not impossible. The right tools can make a big difference in the efficiency and safety of oil and gas operations. The safety tools used in these industries help teams locate potential leaks, cracks, and more, which prevents accidents. Here we’ve discussed the three must-have tools for oil, gas, water treatment, and other industries.

Turbidity Analysers

If you work in the oil, gas, or water treatment industries, then you know how important it is to have a turbidity analyser on hand. Turbidity analysers help you measure the level of suspended solids in a liquid, which is important for both quality control and regulatory compliance.  You can use them to monitor whether the purification process is working correctly by determining if the pollutant concentration changes over time. 

AquaScat 2

The AquaScat is Sigrist's latest and most technologically advanced way to measure the level of water turbidity at 90 degrees. The one key feature that sets the AquaScat apart from its predecessors is that the water sample never comes into contact with the optics. Rather than focusing solely on the top surface of the stream, the light passes through the entire length of the stream. Not only is the AquaScat one of the most high-quality cleaners out there, but it can measure the clarity of the water down to four decimal places. You can choose one of 8 pre-defined measurement ranges or customise your own to match 4-20mA output.

Broken Bag Detectors

Bag filters are an important part of the oil, gas, and water treatment industries. They help remove contaminants from liquids and gases, making them cleaner and safer. But if a bag filter breaks, it can release contaminants into the environment. That's why it's important to have a broken bag detector in place. These detectors can alert you when a bag filter breaks, so you can take action to fix the problem and prevent contamination.

Snifter A1+ Broken Bag Detector

The Snifter A1+ is a low-cost and easy-to-use filter leak detector that is a direct replacement for the Snifter A1 device. To facilitate the commissioning of this device, it includes a quick and easy automatic setup function that lets you see how much dust is in the baghouse within ten minutes of installation. The Snifter A1+ dust monitor features two pre-set alarm levels to detect leaks and help you monitor the effectiveness of your filtration system.

Industrial Sirens and Beacons

The use of industrial sirens and beacons is crucial for the oil, gas, and water treatment industries. They help notify workers of potential dangers, as well as provide a visual warning to those who may be in the vicinity of the hazard. Sirens and beacons can also be used to direct traffic away from an area that is being evacuated. These products are available in many different types, colours, and sizes, so you will be able to find one that suits your needs perfectly. Industrial sirens and beacons are necessary safety devices for any type of industry, so it is important to know what features you need before purchasing one. Some of the products that are available online are D1xC1X05R Radial Alarm Horn & Xenon Strobe, IS-CP4-PB Push Button Manual Call Point, IS-DL105L Intrinsically Safe Alarm Sounder & LED Beacon, and more.

In Line Turbidity Analysers: What You Need To Know

Have you ever wondered what turbidity is? If not, you will probably ask that question after reading this article. Turbidity refers to the cloudiness or haziness of water caused by particles of different sizes and densities in suspension within the water. Measuring turbidity in water is actually quite important because it can tell us how clean or contaminated the water source is. In this article, you’ll learn everything you need to know about Turbidity Analysers.

What is a Turbidity Analyser?

A turbidity analyser is an instrument used to measure particle count in water. In particular, it measures suspended solids in water that can humans can see as haze or cloudiness in a liquid solution. The results of such measurements are typically displayed as Nephelometric Turbidity Units (NTU). The common method for measuring turbidity is utilising of a fixed light beam, aperture, and detector.

The sample is directed into the instrument. The fixed light beam is then shone in the direction of the sample to measure how much light is transmitted and how much is scattered, by photodetectors set 90-degrees to the sample.

What Does It Do?

A turbidity analyser is a device that measures clarity or how clear a liquid is. Some of these devices can also measure colour, but it should be noted that transparency and colour are two different things. When water clarity drops below what’s deemed safe for drinking (turbidity), it is essential to know how much impact this has on your water quality. For example, if you have a high level of dissolved solids in your water, you may not want to use it for crops because it may hinder plant growth. On top of that, suspended particles in your water could be carrying pathogens like coliform bacteria which could contaminate potable drinking water and recreational waters. If left unchecked, people could become sick from bathing or swimming in contaminated waters.

Why Measure Water Turbidity?

The turbidity of water is one of the most important parameters when determining how clear your water is. In general, murky waters aren’t desirable for human consumption or use in industrial processes, and there are some health risks associated with consuming highly turbid water. When we check turbidity levels in our local waters, we can determine if it contains particles that could affect its clarity and safety. Hence, it’s essential to measure the turbidity in water to ensure it’s safe to consume and use.

Whether you are looking for a turbidity analyser, Colour Measurement, ProDetec has got you covered. Prodetec offers innovative Solutions to the Oil & Gas, Chemical, Petrochemical, Manufacturing, Food, Pharmaceutical, Water Treatment and many other industries across Australia and New Zealand. For inquires on products like broken bag detector, Industrial sirens and beacons, turbidity analysers, etc., please get in touch with Prodetec. 

Find Leakages in Baghouse Filters Using the Snifter A1+ Broken Bag Detector

 

Regardless of the industry, it’s vital to monitor, maintain, and prevent leaks in baghouse filters, as this ensures your plant complies with industry standards. Baghouse filters are equipped with several filter bags. When any of the filters fail, the emission limit of dust may exceed, making your plant unsafe. Therefore, it’s crucial to detect any leaks and replace defective bags immediately.

However, given the size of a baghouse, detecting leaks in such a big device can be tricky and challenging. This is because there won’t be any signs or indications of the emission on the clean gas side, even if there’s a small leak. This is when the Snifter A1+ Broken Bag Detector comes to the rescue.

What is a Snifter A1+ Broken Bag Detector?

The Snifter A1+ is an innovative and cost-effective filter leak detector used to monitor all the outlets in a baghouse. With its innovative and advanced features, the Snifter A1+ can quickly identify the leaking bags inside the baghouse compared to its counterparts in the market.

This device has a convenient auto-setup function that can identify dust concentration inside the broken bags within 10 minutes of installation. In addition, the device can detect, alert, and alarm the plant operators when there’s a leak and the filtration process is compromised.

How Does it Work?

The Snifter A1+ detectors depend on unique inductive electrification technology that helps measure the leaks in the bags effectively. The device can calculate the concentration of the dust by the particles interacting with an isolated probe mounted into the duct. When moving particles come into contact with the probe, the devices induce a signal which is then processed through Sintrol’s algorithms to filter the noise while offering an accurate measurement of dust.

The technology used in the Snifter A1+ is more sensitive and reduces the influence of temperature fluctuation, sensor contamination, and velocity changes. With this technology, it’s possible to accurately measure the dust concentration threshold as low as 0.01 mg/m3. Wouldn’t that be a great way to prevent abrasion, degradation and chemical attacks on filter bags? 

Baghouse systems are the most cost-effective and efficient systems for particle control in most industrial settings. But, they’re effective only when they are maintained, inspected, and have proper leak detection equipment in place.

Whether you’re looking for broken bag detectors, turbidity analysers, or industrial sirens and beacons, Prodetec has got you covered! Prodetec provides innovative solutions to various industries. Please get in touch with our team for further queries. 

Top Things to Look For When Installing an Industrial Siren

 

Is your company ready for a disaster? You might not think or look forward to it. But, unfortunately, things can go wrong at any time. Remember, “Prevention is better than cure.” While businesses usually focus on gas monitors and spark detectors, industrial sirens are often overlooked.

In fact, Industrial sirens and beacons are an essential part of keeping your facility secure and protected at all times, providing you with the peace of mind that you need during dangerous situations. That’s why it’s important to pay close attention to the features available on different models and manufacturers, as well as how these features work and what their purposes are. This way, you can ensure that you get exactly what you need out of your industrial siren and that it’s set up properly in order to provide maximum protection whenever you need it most.

Easy Installation

First and foremost, you want a siren that’s simple to install. It shouldn’t require extensive work by an electrician or other technicians. Ideally, you should be able to remove your current system and replace it with a new one within 24 hours of ordering. The last thing you want is to have your business shut down for days at a time during installation!

Reliable Power Source

Before you install any siren, make sure that it will have a constant and reliable power source. If it doesn’t, you’ll find that your siren works randomly or not at all—and most likely when you need it most.

Customisable Options

One of the best things about industrial sirens is that you can find one to suit your needs. Some are designed for use indoors and outdoors, while others only work in open areas. You can also purchase sirens based on their sound level, frequency, and sound duration. This gives you a great deal of control over how much space it covers and how loud it is—all features that come in handy when considering where you should place them at your company’s premises.

Easy Upgrades & Maintenance

As with any device, you want to keep your industrial siren running smoothly. The last thing you want is for it to break down and leave your property vulnerable. To help avoid these problems, inspect your siren weekly and make sure it has plenty of space in which to breathe and make sure there are no holes or cracks through which water can seep.

Warranty & Support Options Available

If you’re purchasing a siren, look into getting one with a warranty. A warranty protects you against manufacturer defects—when your siren breaks down in under a year’s time, it will likely be covered by warranty. And don’t forget that sirens need maintenance and upkeep—for most devices, there will be some sort of maintenance contract available as well.

For further queries on Turbidity Analysers, broken bag detector or industrial sirens, please give us a call.